JVC HR-IP820U - Manual (Page 31)

31
Special Features
BRAND CODE
GI
JERROLD
SCIENTIFIC ATLANTA
ZENITH
PIONEER
HAMLIN
REGAL
OAK
SIGMA
TOCOM
RCA
PANASONIC
SPRUCER 01,02,03,04,05,06,07,08
01,02,03,04,05,06,07,08
09,10
11,12
13,14
15,16,17,18
15,16,17,18
19,20,21
19,20,21
22,23
24,25,26
24,25,26
24,25,26
TV BRAND NAME
01
02
03
04
05
06
07
08
09
10
BRAND CODE
CABLE BOX BRAND NAME
The provided remote control is capable of controlling 10 different TV brands including JVC and 13 different Cable Box brands.
Follow the instructions below to set the appropriate code for your TV or Cable Box.
JVC
MAGNAVOX
MITSUBISHI
PANASONIC
RCA
SHARP
SONY
TOSHIBA
ZENITH
HITACHI
TV Brand Name And Code
Cable Box Brand Name And Code
NOTES:
Ⅲ It is necessary to set the cable box brand in your remote control (this
page) and the Cable Box Controller (
੬
p. 14) individually.
With the remote control, you can change channels using the CH +/–
button and turn on/off your cable box.
With the Cable Box Controller, your cable box’s channels can be
automatically changed during timer-recording.
Ⅲ Cable box brands available for the remote control (listed on the left)
differ from those that are available for the Cable Box Controller
(
੬
p. 14).
Ⅲ It is possible that the remote control will not operate your cable box
even if the cable box’s channels automatically change during timer-
recording using the Cable Box Controller.
1 2 3
4 5 6
7 8 9
0
Digit keys
ENTER
TV/VIDEO
POWER
STOP
VOL. +/–
CH +/–
VCR switch
TV/CABLE
switch
If your TV is a JVC, you don't have to set the TV code.
PREPARATION
1 Turn off the TV by using the TV's remote control.
2 Set the VCR switch to the left.
3 Set the TV/CABLE switch to "TV".
4 While holding down the POWER button, enter your TV's
brand code with the Digit keys then press STOP.
Ⅲ Brand setting is completed. Once you set the brand, you do
not have to reset it until the remote's batteries are replaced.
Ⅲ If you set the wrong code, re-enter the right code.
5 Press POWER to turn the TV power on and check to see if
the remote control works with the TV.
OPERATION
1 Set the VCR switch to the left.
2 Set the remote control's TV/CABLE switch to "TV".
3 Operate the TV.
Ⅲ POWER, TV/VIDEO, CH +/–, VOL. +/– buttons and Digit
keys are available.
4 To operate VCR, set the VCR switch to "VCR".
TV Multi-Brand Remote Control
Some Cable Box brands have more than one code. When your
Cable Box does not function with a specified code, try other codes.
PREPARATION
1 Turn off the Cable Box by using the Cable Box's remote
control.
2 Set the VCR switch to the left.
3 Set the TV/CABLE switch to "CABLE".
4 While holding down the POWER button, enter your Cable
Box's brand code with the Digit keys then press STOP.
Ⅲ Brand setting is completed. Once you set the brand, you do
not have to reset it until the remote's batteries are replaced.
Ⅲ If you set the wrong code, re-enter the right code.
5 Press POWER to turn the Cable Box's power on and check to
see if the remote control works with the Cable Box.
OPERATION
1 Set the VCR switch to the left.
2 Set the remote control's TV/CABLE switch to "CABLE".
3 Operate the Cable Box.
Ⅲ POWER and CH +/– buttons are available.
4 To operate VCR, set the VCR switch to "VCR".
Cable Box Multi-Brand Remote Control
HR-IP820U-EN-2 97.5.20 5:33 PM Page 31