JVC HR-IP820U - Manual (Page 30)

30
+
–
00 00 00 00 00 00 00 00 00 00 0
00 00 00 00 00 00 00 00 00 00 0
Timer-Recording (cont'd)
What this feature does: Usually, the timer mode is not
engaged unless the TIMER button is pressed. But with AUTO
TIMER set to ON, the timer mode is automatically engaged when
the VCR's power is turned off, and is disengaged whenever VCR
power is turned on again.
1 After step 6 (
੬
p. 27) or step
12 (
੬
p. 29), press SET to
choose "ON", and press MENU.
Or...
1 Press MENU, SET, and
SELECT as many times as
necessary to access the AUTO TIMER screen. (
੬
p. 7)
2 Press SET to choose "ON".
3 Press MENU as many times as necessary to exit.
Auto Timer
Make sure the timer mode is disengaged first. Then...
1 Press MENU and then press SELECT (to access the Program
Set screen).
2 Press SET to check through the programs in succession.
To cancel the program...
3 Press CANCEL.
Ⅲ Repeat steps 2 and 3 as necessary.
4 Press MENU as many times as necessary to exit.
To check and cancel programs
AUTO TIMER
Ł ON
OFF
PRESS (SET +/–) FOR CHOICE
PRESS (MENU) TO END
MENU SELECT
SET
1 2 3
4 5 6
7 8 9
0
CANCEL
MENU
SET
SELECT
HR-IP820U-EN-2 97.5.20 5:32 PM Page 30