JVC XL-R2010BK - Manual (Page 13)

11
Engli
s
h
The CDR can play general audio CDs, CD-R and CD-RW media.
1
Press the CDR Control OPEN/CLOSE 0 button
to open the CDR disc tray.
2
Load a disc in position and close the tray by
pressing the CDR Control OPEN/CLOSE
0
button again.
• When a CD-R or CD-RW is loaded in the CDR, the unit deter-
mines the format of the disc and whether it is finalized or not.
3
Press the CDR Control PLAY 3 button to select
the CDR function and start playback at track 1.
• The track number is cleared from the music calender when the
correspending track has finished playing.
• Playback stops automatically at the end of the last track on the
disc.
To stop CDR playback
• Stop playback of a disc in the CDR by pressing the CDR Con-
trol STOP 7 button. The total number of tracks and play time
will be shown in the information display.
To stop CDR playback temporarily
• Pressing the CDR Control PAUSE 8 button at any time when a
CD is playing in the CDR pauses playback. Press the CDR Con-
trol PLAY
3 button to resume playback.
• When playback is paused, the 8 indicator is shown in the dis-
play window.
Removing a CD from the CDR
• To remove a CD from the CDR, press the CDR Control OPEN/
CLOSE 0 button. To remove a CD when it is being played
back, it is recommended that playback first be ended by press-
ing the CDR Control STOP
7 button before pressing the CDR
Control OPEN/CLOSE 0 button. After pressing the CDR con-
trol OPEN/CLOSE 0 button, the tray will open and the CD can
be removed. Press the CDR control OPEN/CLOSE 0 button
once more to close the tray.
Notes
• When an unfinalized CD-R or CD-RW is loaded in the CDR
and the CDR Control OPEN/CLOSE 0 button is pressed to
open the CDR disc tray, “FINALIZE?” is shown in the informa-
tion display. If you do not wish to finalize the CD at that time,
press the CDR Control OPEN/CLOSE
0 button again. For
more information on finalizing a CD, see page 34.
• If playback of an unfinalized disc is stopped or if tracks are
skipped (forward or reverse), some data of the track (or begin-
ning of next track in the case of skipping) may be cut (not read)
when playback starts again.
• The total track time does not always match total playback time
(time shown in the information display) exactly because the
playback time includes lead-in and lead-out spaces as well.
CDR Playback Operations
STANDBY
STANDBY/ON
MAX MIN
LEVEL PHONES PLAY MODE CD EDIT
REC SOURCE SELECTOR
CD REC
STOP PLAY PAUSE
REC SOURCE DIGITAL CD LINE MIC OPEN/CLOSE OPEN/CLOSE
XL-R2010 CD/CDR MULTIPLE COMPACT DISC RECORDER
CANCEL SET MENU
PAUSE REC/REC MUTING PLAY STOP
SYNCHRO
FINALIZE
MULTI JOG/REC LEVEL
+ –
MIX BLANCE CD LINE LINE MIC
MIC
1
3
2
7 8
OPEN/CLOSE
Place the CD with its label side facing up.
Place an 8-cm CD in the center cutout.
STOP
PAUSE
Eng.book Page 11 Monday, May 28, 2001 9:46 AM