JVC XL-R2010BK - Manual (Page 21)

19
Engli
s
h
Recording onto CD-R/RW Discs
Notes on Recording
•
Do not use CD-R or CD-RW discs with dust and/or scratches on
the surface as this may cause the recording to sound rough and
may cause skipping when played backed. It may even cause the
unit to malfunction.
• When using a recording function (one of the recording indica-
tors in the display window is illuminated), do not subject the
unit to any shock or vibration.
• Before recording on a CD-R disc, it is recommended to make a
sample recording on a CD-RW disc.
• If the source CD being recorded from the CD player is itself a
first-generartion digital copy, digital recording cannot be per-
formed. When this occurs, the recording type will switch from
digital to analog automatically, and you should adjust the
recording level.
Read through this section before recording.
- Discs not manufactured for holding audio data (such as discs for
standard computer use) cannot be recorded using this CDR.
- Discs with a format other than CD-DA (Compact Disc-Digital
Audio) cannot be recorded.
- The recording of discs over 80 minutes in length is not supported.
- Multi-session discs cannot be recorded.
Types of recording
The following types of recording are possible with this unit.
Manual recording (see page 20)
Manually control the recording source used and the tracks you
want to record. The following is a list of possible settings. (High-
speed recording is not possible.)
•
DIGITAL (digital recording from external sources connected to
the DIGITAL IN OPTICAL terminal or COAXIAL terminal)
• CD (digital/analog recording of the CD loaded in the CD
player)
• LINE (analog recording of external sources connected to the
LINE IN terminal)
• MIC (analog recording of input from a microphone connected
via the MIC jack)
Synchronized one-button recording of one entire CD
(See page 22)
Press the CD REC button while the main unit is in the stop mode to
instantly dub the CD in the CD player to a CD-R or CD-RW disc.
New to this feature is an automatic disc finalization function that
can be set before recording begins.
Synchronized one-button recording of a single track
(See page 23)
Press the CD REC button while the unit is playing or paused to
instantly dub the current track on a CD in the CD player to a CD-R
or CD-RW disc.
Listening Edit recording (see page 25)
Select tracks to be recorded from the CD in the CD player while
listening to them. New to this feature is an automatic disc finaliza-
tion function that can be set before recording begins. (High-speed
recording; CD-R 4x, CD-RW 2x)
Program Edit recording (see page 26)
Program tracks to be recorded from the CD loaded in the CD
player. New to this feature is an automatic disc finalization func-
tion that can be set before recording begins. (High-speed recording;
CD-R 4x, CD-RW 2x)
Synchronized recording from external sources
(see page 29)
Start recording from an external source as soon as the CDR detects
the signal being input. (High-speed recording is not possible.)
Mixed input recording (see page 30)
Simultaneously record the inputs from two analog sources.
(Recording level and mixing balance can be adjusted manually.)
Note
• Depending on the type of CD-R disc you are using, volume dur-
ing recording, when recording at 4x speed, may be louder than
that for normal recording speed. This is because you are using
high-speed recording, and is not a malfunction.
Automatically finalize at the end of a recording onto a CD-R or
CD-RW disc when recording the sound from the CD player using
the CD REC button. The Add Finalize feature is enabled at the
time of purchase. This feature can also be set to disable finalization
at the end of a recording.
To disable the Add Finalize feature
Place the unit in the stop mode and follow the steps below.
1
Press the MENU button.
• "TRACK ERASE" is shown in the information display.
2
Turn the MULTI JOG to display "FINALIZE".
3
Press the SET button.
4
Turn the MULTI JOG to select "OFF".
5
Press the SET button.
Finalization will not be performed upon completion of a recording
with the CD RED button.
• To enable the Add Finalize feature, follow the steps 1 through 3
in the above procedure and select "ON" in step 4.
(To be continued on the next page)
Add Finalize Feature
STANDBY
STANDBY/ON
MAX MIN
LEVEL PHONES PLAY MODE CD EDIT
REC SOURCE SELECTOR
CD REC
STOP PLAY PAUSE
REC SOURCE DIGITAL CD LINE MIC OPEN/CLOSE OPEN/CLOSE
XL-R2010 CD/CDR MULTIPLE COMPACT DISC RECORDER
CANCEL SET MENU
PAUSE REC/REC MUTING PLAY STOP
SYNCHRO
FINALIZE
MULTI JOG/REC LEVEL
+ –
MIX BLANCE CD LINE LINE MIC
MIC
3,5
2,4
1
STANDBY/ON
CD REC
PLAY MODE
• REC
REC MUTING
REC SOURCE MENU
PITCH 0 CAN CEL
REPEAT CD
PITCH +
SET
PITCH–
RM–SXLR2010A REMOTE CONTROL
CDR
CD EDIT FINALIZE DISPLAY
1 2
4 5
7 8
3
6
9
10 +10
FADE SYNCHRO
C O N T R O L
1 3,5
2,4
Eng.book Page 19 Monday, May 28, 2001 9:46 AM