JVC XL-R2010BK - Manual (Page 25)

23
Engli
s
h
•
1
Stop the CD to be recorded.
2
Load a recordable CD-R or CD-RW disc into the
CDR and close the tray.
• The disc is read if required.
3
Press the CD REC button (main unit/remote
control) to strart recording. “DISC DUBBING” is
shown in the information display
• When a blank disc is in the CDR tray, “UPDATE OPC” is
shown following “DISC DUBBING”.
When “ADD FINALIZE?” is shown in the information
window:
•
No response (no input) assumes that finalization is to be per-
formed, or you can press the SET button (main unit/remote con-
trol) to confirm that finalization is to be done. Press the
CANCEL button (main unit/remote control) to keep the disc
unfinalized.
Note
•
This message will not be shown if the menu FINALIZE func-
tion setting is “OFF”. The default setting is “ON”.
The CD player and CDR start simultaneously. (This is
called synchronized recording)
•
Recording starts from the first track of the CD.
• When a digital CD is recorded, its signals are recorded in their
original form. Track marks are inserted automatically where one
track changes to the next and track numbers change accordingly.
• As high-speed recording is performed (CD-R 4x, CD-RW 2x),
there is no audio output during the recording process. When
recording at normal speed, follow the procedure for “Setting the
Unit for High-speed Recording” (see page 28) and start recording
after setting the speed to normal speed. You can listen to the source
while it is being recorded.
When the recording of the last song in the CD is
complete, “STOP DUBBING” flashes and recording
automatically stops.
When recorded without canceling “ADD FINALIZE?”
“FINALIZE” is shown in the information window after recording
is stopped and finalization is automatically performed.
Checking a track number during recording
Press the DISPLAY button on the remote control.
To stop the recording at any time
Press the CDR or CD Control STOP
7 button on the main unit or
the 7 (stop) button on the remote control. “STOP DUBBING”
flashes in the information display, and the unit stops recording.
Notes
• There is no need to adjust the recording.
• If the source CD being recorded from the CD player is itself a
first-generation digital copy, digital recording cannot be per-
formed. When this occurs, the recording type will switch from
digital to analog automatically.
• This type of recording cannot be started during CD playback. It
must start from the beginning of the first track of the CD.
• When the CD REC button is pressed, the function is automati-
cally switched to CD. This means that when the CD to be
recorded has been selected, recording can proceed straightaway.
• Upon completion of recording, “STOP DUBBING” flashes in
the information display. Always wait for the “STOP DUB-
BING” message to be cleared before proceeding with the next
operation.
• When you try to eject the disc from the CDR tray, “FINAL-
IZE?” is shown in the information display When recording onto
an unfinalized disc. To finalize the disc, press either the SET or
FINALIZE button (main unit/remote control). To skip the final-
ization process, press the OPEN/CLOSE
0 button one more
time or the CANCEL button (main unit/remote control).
• Depending on the disc, the entire CD may not be recorded. In
such a case, use the 1 Disc Dubbing feature (see page 24) to
record.
Performing synchronized one-button recording of
a single track
(To be continued on the next page)
STOP PLAY
1 2 3 4
5 6 7 8
9 10 11 12
DIGITAL
44.1kHz
CD REC C D - R
SYNC 4X AUTO TRACK
L
R – 40 30 20 10 dB 6 3 0
Remaining play time of
track being recorded Remaining recording time on
CD-R or CD-RW
Track number
CD-R or CD-RW
track number
Remote Control
DISPLAY
STANDBY
STANDBY/ON
MAX MIN
LEVEL PHONES
PLAY MODE CD EDIT
REC SOURCE SELECTOR
CD REC
STOP PLAY PAUSE
REC SOURCE DIGITAL CD LINE MIC OPEN/CLOSE OPEN/CLOSE
XL-R2010 CD/CDR MULTIPLE COMPACT DISC RECORDER
CANCEL SET MENU
PAUSE REC/REC MUTING PLAY STOP
SYNCHRO
FINALIZE
MULTI JOG/REC LEVEL
+ –
MIX BLANCE CD LINE LINE MIC
MIC
2
3 1 7
STANDBY/ON
CD REC
PLAY MODE
• REC
REC MUTING
REC SOURCE MENU
PITCH 0 CHA NCE L
REPEAT CD
PITCH +
SET
PITCH–
RM–SXLR2010A REMOTE CONTROL
CDR
CD EDIT FINALIZE DISPLAY
1 2
4 5
7 8
3
6
9
10 +10
FADE SYNCHRO
C O N T R O L
1
1
3
7
Eng.book Page 23 Monday, May 28, 2001 9:46 AM