JVC XL-R2010BK - Manual (Page 31)

29
Engli
s
h
4
Turn the MULTI JOG control or press the 2¥3
(menu) button on the remote control and
choose the setting “TR SPACE ON” or “TR
SPACE OFF”.
• Press the CANCEL button (main unit/remote control) to cancel
the procedure and return to the normal display.
5
Press the SET button.
Notes
•
There is no indicator to show the status of this function.
• This function will work when you begin recording from the
recording pause mode except when performing synchronized
one-button recording.
This unit offers the ability to record from various external sources
to the CDR using synchronized START and START&STOP func-
tions. This feature is applicable to external digital audio equipment
connected via the DIGITAL IN OPTICAL and COAXIAL termi-
nals and the LINE IN (REC) terminal.
• Synchronized recording to the CDR from an external
source.
1
Load a recordable CD-R or CD-RW disc in the
CDR tray.
• The disc is read if required.
2
Press the REC SOURCE SELECTOR button on the
main unit or the REC SOURCE button on the remote
control repeatedly to select the recording source.
• Each press of the selection button on either the main unit or remote
control, toggles one step through the following source choices.
DIGITAL IN: Record digital signals via the OPTI-
CAL terminal.
COAXIAL IN: Record via the COAXIAL terminal.
CD DIGITAL: Record digital signals from CD player.
CD ANALOG: Record analog signals from CD player.
LINE IN: Record via the LINE IN terminal.
MIC IN: Record via the MIC jack.
CD+LINE MIX: Record via CD player and LINE mix.
CD+MIC MIX: Record via CD player and MIC mix.
LINE+MIC MIX: Record via LINE and MIC mix.
• Press REC SOURCE SELECTOR on the main unit or REC
SOURCE button on the remote control to choose the proper ter-
minal connection for the source to be recorded from (DIGITAL
IN, COAXIAL IN or LINE IN).
• If DIGITAL IN or COAXIAL IN is selected, the LED lamp
under DIGITAL IN selection will light.
3
Press the SYNCHRO button (main unit/remote
control).
• The CDR is put into the synchronized recording pause mode.
• The source device must be stopped (cannot be playing) at this
time.
4
Start playing of the source unit
Note
• When recording with the SYNCHRO button, recording starts
when the input level is detected. If the track starts very quietly
(with a low input level), the beginning of the track may not be
recorded. When recording from an analog source, such as records
or tapes, recording may not start if the recording level is too low.
Performing synchronized recording of a digital source
• Recording is started based on the digital signal.
• Track marking is based on track information recorded in the
digital signal. For digital sources other than CD, MD and DAT,
track marking is based on silent track space.
Performing synchronized recording of an analog source
• Recording is started when the unit detects an audio signal.
• Track marking is based on silent track space which the unit
interprets to be track breaks. If automatic track marking has
been turned off, manual track marking is necessary during the
recording process.
To stop recording at any time
Press the CDR Control STOP
7 button on the main unit or the 7
(stop) button on the remote control.
Note
• The signals from digital devices attached to the unit are not out-
put to the DIGITAL OUT terminal of the unit.
Synchronized Recording from
External Sources
STANDBY
STANDBY/ON
MAX MIN
LEVEL PHONES
PLAY MODE CD EDIT
REC SOURCE SELECTOR
CD REC
STOP PLAY PAUSE
REC SOURCE DIGITAL CD LINE MIC OPEN/CLOSE OPEN/CLOSE
XL-R2010 CD/CDR MULTIPLE COMPACT DISC RECORDER
CANCEL SET MENU
PAUSE REC/REC MUTING PLAY STOP
SYNCHRO
FINALIZE
MULTI JOG/REC LEVEL
+ –
MIX BLANCE CD LINE LINE MIC
MIC
3
1
2 7
STANDBY/ON
CD REC
PLAY MODE
• REC
REC MUTING
REC SOURCE MENU
PITCH 0 CHA NCE L
REPEAT CD
PITCH +
SET
PITCH–
RM–SXLR2010A REMOTE CONTROL
CDR
CD EDIT FINALIZE DISPLAY
1 2
4 5
7 8
3
6
9
10 +10
FADE SYNCHRO
C O N T R O L
3
2
7
Eng.book Page 29 Monday, May 28, 2001 9:46 AM