JVC XL-R2010BK - Manual (Page 37)

35
Engli
s
h
5
Press the SET button again to confirm the
operation.
• “UNFINALIZE” is shown in the information display as the
unfinalizing procedure is performed. The procedure takes about
2 minutes, and the level meter is used to indicate approximately
how much time is remaining until unfinalization is complete.
Upon completion, the normal display is shown.
* known as Sampling Rate Converter.
The FS converter of this unit performs the conversion of digital sig-
nals from sources that use sampling frequencies other than
44.1kHz to the sampling frequency of 44.1kHz, which is necessary
for recording the signals to a CD-R or CD-RW disc.
•
When the FS converter is turned off, the converter is bypassed if
the digital signal of the source has a sampling frequency of
44.1kHz and when analog and multiple input recording are per-
formed.
• If source sampling frequencies of 32kHz or 48kHz are detected,
the FS converter is activated automatically and the signal is
routed through it.
• When the FS converter is turned on, all signals to be recorded
are routed through it regardless of the sampling frequency, even
the 44.1kHz digital signal is passed through it as the converter
works as a filter to reduce signal fluctuation in the disc record-
ing. For this reason, having the function set to “ON” is recom-
mended for most recording purposes.
• When recording specially encoded discs such as dts *1 ,
HDCD *2 , etc., be sure to turn the converter off (setting to
“OFF”) using the following procedure (see Step 4).
*1 dts is trademark of Digital Theater Systems, Inc.
*2 HDCD

is a registered trademark of Pacific Microsonic, Inc.
Note
•
When recording from the CD player, the sampling rate con-
verter is always turned off.
1
When the unit is in the stop mode, press the
MENU button (main unit/remote control).
2
Turn the MULTI JOG control on the main unit or
press the
2 / 3 (menu) button on the remote
control until “CONVERTER” is shown in the
information display.
3
Press the SET button (main unit/remote
control).
• The “CONVERTER ON” is shown and “ON” flashes in the
information display. (The default setting is “ON”.)
• Press the CANCEL button (main unit/remote control) if you do
not wish to perform this procedure.
4
Turn the MULTI JOG control on the main unit or
press the
2 / 3 (menu) button on the remote
control to select “ON” or “OFF”.
• Press the CANCEL button (main unit/remote control) if you do
not want to perform this procedure. The setting is not changed.
5
Press the SET button (main unit/remote
control).
Bypassing the FS Converter
(Sampling Frequency
Converter*) for More Efficient
Digital Recording
STANDBY
STANDBY/ON
MAX MIN
LEVEL PHONES
PLAY MODE CD EDIT
REC SOURCE SELECTOR
CD REC
STOP PLAY PAUSE
REC SOURCE DIGITAL CD LINE MIC OPEN/CLOSE OPEN/CLOSE
XL-R2010 CD/CDR MULTIPLE COMPACT DISC RECORDER
CANCEL SET MENU
PAUSE REC/REC MUTING PLAY STOP
SYNCHRO
FINALIZE
MULTI JOG/REC LEVEL
+ –
MIX BLANCE CD LINE LINE MIC
MIC
3,5
2,4
1 CANCEL
STANDBY/ON
CD REC
PLAY MODE
• REC
REC MUTING
REC SOURCE MENU
PITCH 0 CHA NCE L
REPEAT CD
PITCH +
SET
PITCH–
RM–SXLR2010A REMOTE CONTROL
CDR
CD EDIT FINALIZE DISPLAY
1 2
4 5
7 8
3
6
9
10 +10
FADE SYNCHRO
C O N T R O L
2,4
3,5
1
CANCEL
Eng.book Page 35 Monday, May 28, 2001 9:46 AM