JVC XL-R2010BK - Manual (Page 42)

40
Message Significance Remedy
NO R/RW DISC The disc inserted is a CD for computer data.
Recording and erase functions are not pos-
sible. Check to see if the CD-ROM is recorded in
audio for mat. If not, replace with a disc
recorded using the CD-DA format.
DISC FULL The CD-R or CD-RW has no available time. Replace with another recordable CD-R or
CD-RW. Finalization of the disc is recom-
mended.
TNO FULL 99 tracks have been recorded on the disc.
Further recording is not possible. Finalize the disc. Replace the disc to per-
form further recording.
CANNOT REC Recording is not possible. This may be
caused by poor connections or disc trouble. Check connections and/or replace the disc.
UNLOCK When performing digital recording of an
external component, the digital signal from
the component is not being sent or the sig-
nal being sent cannot be recorded by this
unit. Check the connection between the compo-
nent and this unit and confirm that the digi-
tal signal being output from the component
is compatible with this unit.
SCMS PROTECT In accordance with SCMS regulations, digi-
tal recording cannot be performed. Switch the source selection to select input
from the analog connections, and perform
analog recording.
NOT AUDIO IN The digital signal is not an audio format. Set the source component to output a digital
audio signal. For example, if a data track on
a CD is selected, switch to a track that con-
tains audio data.
NOT REC MUTE The
¶
REC/REC MUTING button has
been pressed at a time when the function
cannot be performed.
See page 21 for information on when the
muting function can be used, and press the
¶
REC/REC MUTING button when the
function can be performed.
SHORT REMAIN Not enough time remains on the disc to con-
tinue synchronized recording from the CD
player to the CDR. Replace the disc with a disc that contains
sufficient recording time.
CANNOT FIN Trouble with the CD-RW has prevented
finalization from being performed. Replace the disc
NO RW DISC A CD-RW has not been inserted. Erase and
Unfinalize functions are not possible.
CANNOT ERASE Trouble with the CD-RW has prevented an
erase function from being performed. Replace the disc
CANNOT UNFIN Trouble with the CD-RW has prevented the
Unfinalize function from being performed. Replace the disc
DAO DISC The Unfinalize function cannot be per-
formed with discs recorded using the
“DISC at Once” recording system.
SKIP FULL The maximum number of 21 tracks on the
disc that can be skipped has been reached.
Skip marking more than 21 tracks is not
possible with this unit.
Eng.book Page 40 Monday, May 28, 2001 9:46 AM