JVC XL-R2010BK - Manual (Page 38)

36
When performing digital synchronized start recording of an exter-
nally connected digital source, synchronized start recording begins
when a digital signal is encountered in the record pause mode.
However, if the recording source is connected to the DIGITAL IN
(DIGITAL IN OPTICAL) terminal, it is also possible to set this unit
to start and stop recording when you are recording a single track.
1
When the unit is in stop mode, press the MENU
button .
2
Turn the MULTI JOG on the main unit or press
the
2 2 2 2 / 3 3 3 3 button on the remote control until “D-
IN SYNCHRO” appears in the display.
3
Press the SET button.
• The current setting appears in the display.
4
Turn the MULTI JOG on the main unit or press
the
2 2 2 2 / 3 3 3 3 button on the remote control to select
“START” or “START&STOP”.
• When “START” is selected, only the start of the digital signal is
recorded synchronously.
• When “START&STOP” is selected, both the start and stop of
single track recroding are controlled by information in the
source digital signal.
• Press the CANCEL button if you do not want to perform this
procedure. The setting is not changed.
5
Press the SET button.
• Please note that the type of synchronized recording being per-
formed as set in the above procedure is not indicated in the dis-play
during actual recording. Even when recording is started, only the
“SYNCHRO” indicator remains lit until recording is stopped.
• Even if this setting is set to “START&STOP”, recording is con-
cluded automatically if the source is stopped, the disc is
changed, or if a track search is performed.
Note
• Pressing the SNCHRO button when unlocked displays
“UNLOCK” in the information window and releases the syn-
chronized condition.
By performing the following procedure, all menu settings stored in
the unit are cleared and the unit is reset to the factory default settings.
1
When the unit is in stop mode, press the MENU
button (main unit/remote control).
2
Turn the MULTI JOG control on the main unit or
press the
2 / 3 (menu) button on the remote
control until “SET DEFAULT” is shown in the
information display.
3
Press the SET button (main unit/remote control).
• “SET DEFAULT?” is shown in the information display.
• Press the CANCEL button (main unit/remote control) if you do
not want to perform this procedure.
4
Press the SET button (main unit/remote control).
• The unit is reset to the factory default settings and returns to the
stop mode.
Setting Up Synchronized Start
Recording for External Digital
Sources (CD, MD, and DAT only)
STANDBY/ON
CD REC
PLAY MODE
• REC
REC MUTING
REC SOURCE MENU
PITCH 0 CHA NCE L
REPEAT CD
PITCH +
SET
PITCH–
RM–SXLR2010A REMOTE CONTROL
CDR
CD EDIT FINALIZE DISPLAY
1 2
4 5
7 8
3
6
9
10 +10
FADE SYNCHRO
C O N T R O L
2,4
3,5
1
CANCEL
STANDBY
STANDBY/ON
MAX MIN
LEVEL PHONES
PLAY MODE CD EDIT
REC SOURCE SELECTOR
CD REC
STOP PLAY PAUSE
REC SOURCE DIGITAL CD LINE MIC OPEN/CLOSE OPEN/CLOSE
XL-R2010 CD/CDR MULTIPLE COMPACT DISC RECORDER
CANCEL SET MENU
PAUSE REC/REC MUTING PLAY STOP
SYNCHRO
FINALIZE
MULTI JOG/REC LEVEL
+ –
MIX BLANCE CD LINE LINE MIC
MIC
3,5
2,4
1 CANCEL
At the time of purchase
DUB- SPEED HIGH (CD- R:4x,CD- RW:2x)
FINALIZE ON
AUTO TRACK ON
TRACK SPACE ON
CONVERTER ON
D- IN SYNCHRO START
Resetting the Unit to the
Factory Default Settings
STANDBY
STANDBY/ON
MAX MIN
LEVEL PHONES PLAY MODE CD EDIT
REC SOURCE SELECTOR
CD REC
STOP PLAY PAUSE
REC SOURCE DIGITAL CD LINE MIC OPEN/CLOSE OPEN/CLOSE
XL-R2010 CD/CDR MULTIPLE COMPACT DISC RECORDER
CANCEL SET MENU
PAUSE REC/REC MUTING PLAY STOP
SYNCHRO
FINALIZE
MULTI JOG/REC LEVEL
+ –
MIX BLANCE CD LINE LINE MIC
MIC
3,4
2
1 CANCEL
PLAY MODE
• REC
REC MUTING
REC SOURCE MENU
PITCH 0 CHA NCE L
REPEAT CD
PITCH +
SET
PITCH–
RM–SXLR2010A REMOTE CONTROL
CDR
10 +10
FADE SYNCHRO
C O N T R O L
1
3,4
2
CANCEL
Eng.book Page 36 Monday, May 28, 2001 9:46 AM