JVC XL-R2010BK - Manual (Page 19)

17
Engli
s
h
To change the contents of the program
In the CD stop mode, press the SET button followed by the CAN-
CEL button. Programmed tracks will be erased in the reverse order
of when they were entered (starting from the last track pro-
grammed). Press the CANCEL button twice to erase one track.
Continue erasing in this manner until all of the tracks you wanted
to remove are erased. Enter new tracks into the program by follow-
ing programming Step 4.
To check the contents of the program
To check the tracks you have entered into the program, press the
CD Control STOP
7 button, and use the MULTI JOG Control to
review the programmed tracks. The program steps (PG S**) and
track numbers will be shown in the information display one at a
time as you toggle through the program (S: Step; **: step number).
To return to continuous playback
In the CD stop mode, repeatedly press the PLAY MODE button on
the main unit until the total playing time is shown in the informa-
tion display.
Note
•
When the power is turned off, the contents of the program are
erased.
If you want to program and record tracks, see “Program Edit
Recording” on page 26.
1
Load a CD into the tray of the CD player.
• Only tracks on the CD loaded in the CD player can be registered
into the program (i.e., tracks on a CD loaded in the CDR cannot
be selected for playback).
• “CD READ DISC” will be shown in the information display as
the unit reads the information from each disc.
2
Press the CD Deck Selection button to place the
unit in the CD mode.
• The CD indicator is shown in the display window.
3
Press the PLAY MODE button.
• The PROGRAM indicator is shown in the display window, and
if no program has been registered, “PG NO PROGRAM” is
shown in the information display.
4
Press the SET button.
• The information display will show the following.
5
Select and enter a track number (1-99) using
the
4 (reverse) or ¢ (forward) buttons, and
then press the SET button.
(To be continued on the next page)
PLAY MODE
Main Unit
Programming Playback Using
the Remote Control
STANDBY/ON
CD REC
PLAY MODE
• REC
REC MUTING
REC SOURCE MENU
PITCH 0 CHA NCE L
REPEAT CD
PITCH +
SET
PITCH–
RM–SXLR2010A REMOTE CONTROL
CDR
CD EDIT FINALIZE DISPLAY
1 2
4 5
7 8
3
6
9
10 +10
FADE SYNCHRO
C O N T R O L
4
3 2
Program step number
Track number
SET
1. Select the track. 2. Enter the selection
selection.
Eng.book Page 17 Monday, May 28, 2001 9:46 AM