JVC HM-DR10000EU - Manual (Page 30)

30
EN
ACCESS SHOWVIEW SCREEN
1
Press PROG.
The front display panel looks like this:
ENTER SHOWVIEW NUMBER
2
Press the NUMBER keys to
enter the S HOW V IEW
number of a programme
you wish to record, then
press OK.
● If you make a mistake,
press and input the
correct number.
The S
HOW
V
IEW
number you enter appears on the front
display panel:
The display panel can show only a 4-digit number.
ACCESS SHOWVIEW PROGRAM
SCREEN
3
The S HOW V IEW Program
screen appears (if you’re
just starting out, "P1"
appears).
The display panel shows the
programme start time.
Pressing
changes the
display to the programme
stop time, then the date and
channel position.
IMPORTANT
Make sure the channel position number you wish
to record is displayed; if not, see "S
HOW
V
IEW ® Setup"
on page 69 and set the Guide Program number for
that S
HOW V IEW number correctly.
● If the number you entered is invalid, "ERROR" appears
on the screen and "Err" appears on the display panel.
Press and input a valid S
HOW V IEW number.
● If the "GUIDE PROG SET" screen appears, see
"ATTENTION – Regarding Guide Program Number
Set" on page 31.
SP
S
HOW
V
IEW
®
Timer
Programming
Before performing the S HOW V IEW Timer Programming:
● Make sure that the recorder's built-in clock is set
properly.
● Insert a cassette with the safety tab in place. The recorder
will come on automatically.
● Set the appropriate recording mode (D-VHS, S-VHS or
VHS) (
੬
pg. 22, 23).
● Turn on the TV and select the AV mode.
With the S HOW V IEW system, timer programming is greatly
simplified because each TV programme has a corresponding
code number which your recorder is able to recognize.
TIMER RECORDING
SHOWVIEW
[0 – 9] : SHOWVIEW
[+/–] : EXPRESS PROGRAMING
[PROG] : EXIT
SHOWVIEW
1 2 3 4 5 6 7 8
[0 – 9] =
[ ] : DELETE
[PROG] : EXIT
– P1 –
SHOWVIEW 123456789
START STOP
21:00 = 22:00
SP(STD) VPS/PDC OFF
DATE TV PROG
25.12 1
ARD
: OK
ACCESS SHOWVIEW DISPLAY
1
Press LCD PROG.
The LCD panel looks like this:
ENTER SHOWVIEW NUMBER
2
Press the NUMBER keys to enter the S
HOW
V
IEW
number
of a programme you wish to record, then press .
● If you make a mistake, press and input the correct
number.
The S HOW V IEW number you enter appears on the LCD
panel:
Then go to step 3 in the right column.
You can use the remote control with LCD panel to enter the
S
HOW
V
IEW
number.
LCD panel
1 2 3
4 5 6
7 8 9
1
2
1
2
3
– –:– –
0
3
4
4
NUMBER
PROG
OK
LCD PROG