JVC HM-DR10000EU - Manual (Page 60)

60
EN
The AV2 IN/DECODER connector can be used as an input
terminal for an external decoder (descrambler). Simply connect
a decoder and you can enjoy the variety of programming that is
available through scrambled channels.
SELECT INPUT MODE
1
Set "AV2 SELECT" to "DECODER". (
੬
pg. 54)
CONNECT DECODER
2
Connect your recorder's AV2 IN/DECODER connector
to the decoder's Euroconnector using a 21-pin SCART
cable.
SET TUNER
3
Perform the procedure as described in "When Receiving
A Scrambled Broadcast" on page 65.
Connecting/
Using A
Decoder
TV Receiver
TV Aerial
Cable
RF Cable (provided)
AV1 IN/OUT
Decoder
AV2 IN/DECODER
SYSTEM CONNECTIONS (cont.)