Edit from a camcorder, Editing (cont.), Make connections – JVC HM-DR10000EU User Manual

Page 50: Set recording mode, Set recorder’s input mode, Set edit mode (s-vhs/vhs mode only), Start camcorder, Start recorder

Advertising
background image

50

EN

EDITING (cont.)

Edit From

A Camcorder

NOTES:

●

All necessary cables can be obtained from your dealer.

●

You can also use another video recorder as the player instead
of a camcorder.

●

When you select EDIT to dub tapes in step 4, be sure to select
AUTO (or NORM when B.E.S.T. is set to OFF) after you finish
dubbing the tapes.

●

When you are editing through the DV IN connector, the
recorder will stop if the player begins playing a blank portion
of tape or the signal is interrupted.

1

2

3

4

5

6

7

8

9

1

2

1

2

3

– –:– –

0

3

4

4

TV PROG

NUMBER "0"

You can use a camcorder as the source player and your video
recorder as the recorder.
You can perform digital editing if the camcorder has a DV
output connector.

MAKE CONNECTIONS

1

A

If the camcorder has no S-VIDEO output connector...

... connect the camcorder’s AUDIO/VIDEO OUT
connectors to the recorder’s front panel AUDIO/
VIDEO input connectors.

B

If the camcorder has an S-VIDEO output connector...

... connect the camcorder’s S-VIDEO OUT and
AUDIO OUT connectors to the recorder’s front
panel S-VIDEO and AUDIO input connectors.

A

C

If the camcorder has a DV OUT connector...

... connect the camcorder’s DV OUT connector to
the recorder’s DV IN connector.
See "DV Sound Setting" (

੬

pg. 51) for the DV

sound selection.

● When using a monaural camcorder, connect its

AUDIO OUT connector to the AUDIO L input
connector on your recorder.

● When a Master Edit Control-equipped JVC camcorder

is used, the camcorder is capable of controlling the
recorder. Refer to the camcorder’s instruction manual
for operating procedure.

SET RECORDING MODE

2

Set the appropriate recording mode (D-VHS, S-VHS or

VHS) (

੬

pg. 22, 23).

SET RECORDER’S INPUT MODE

3

Press NUMBER key "0" and/or TV PROG to select "F-1"

for the AUDIO/VIDEO input connectors, "S-2" for the
AUDIO/S-VIDEO input connectors, or "I-1" for the DV
input connectors, depending on the connectors being
used.

SET EDIT MODE (S-VHS/VHS

MODE ONLY)

4

See "Picture Control" on page 49.

START CAMCORDER

5

Engage its Play mode.

START RECORDER

6

Engage its Record mode.

Advertising