JVC HM-DR10000EU - Manual (Page 7)

EN
7
SELECT LANGUAGE
3
Press OK. The Language Set display appears on the
front display panel and/or on the screen.
If you are referring to the front display panel
Press %fi to select your language code.
If you are referring to
the on-screen display
Press %fi to move the
highlight bar (pointer) to
the language of your
choice.
PERFORM AUTO SET UP
4
Press OK.
If you are referring to the front display panel
Press %fi to select "Auto" and press OK or #
.
If you are referring to the on-screen display
Press %fi to move the
highlight bar (pointer) to
"AUTO SET" and press OK
or
#
.
"Auto" blinks on the display panel; do NOT press
any button on the recorder or remote control until
the display panel shows clock time, "(CH) 1" or
"– –:– –" as illustrated on page 9.
● If you are using the on-
screen display, the
AUTO SET screen will
appear. As Auto Set Up
progresses, the " "
mark on the screen
moves from left to
right.
NOTES:
● Auto channel set function takes place first; it assigns automati-
cally all receivable stations in your area.
● Auto clock set function sets the clock automatically by
reading the clock setting data from a station transmitting a
PDC signal while auto channel set is being performed.
● During auto channel set, the recorder recognizes each station
name of the detected stations and stores them in the
recorder's memory, then automatically sets the Guide
Program numbers assigned by the S
HOW V IEW system for those
stations according to the broadcast area.
● In the area where no TV station transmits a PDC signal, the
recorder can perform neither auto clock set nor auto Guide
Program number set.
● If there is a power cut, or if you press or MENU while Auto
Set Up is in progress, Auto Set Up will be interrupted; be sure
to turn off the recorder power once and try again from step 1.
● Auto clock may not function properly depending on the
reception condition.
AUTO SET
PLEASE WAIT
[MENU] : EXIT
0 + + +
Beginning End
(Ex.) DEUTSCH is selected for SUISSE
(Ex.) DEUTSCH is selected
International telephone
country code Language code
Language Code
ENGLISH
: 01 NEDERLANDS : 06
DEUTSCH : 02 SVENSKA : 07
FRANCAIS : 03 NORSK : 08
ITALIANO : 04 SUOMI : 09
CASTELLANO : 05 DANSK : 10
AUTO SET
T-V LINK
[ 5∞] =
[MENU] : EXIT
DANSK
SUOMI
NORSK
SVENSKA
NEDERLANDS
CASTELLANO
ITALIANO
FRANCAIS
DEUTSCH
ENGLISH
[ 5∞] =
[MENU] : ENDE