JVC V.NETWORKS VN-C10 - Manual (Page 20)

20
2-2 Setting the PC’s IP Address for Windows XP
Preparations (Step 2 Setting the Network)
After attaching the camera, proceed to set the IP address of the PC by which the
camera is operated.
With Windows XP, follow the procedure below to set the IP address.
(For Windows 2000,
☞
Page 22)
Ensure that [Client for Microsoft Networks]
is selected .
Note
Under a DHCP environment and also if the IP address to be allotted to [V.Networks] is already
known, skip 2-2 [Setting the PC’s IP Address].
Note
If either [Client for Microsoft Networks]
or [Internet Protocol (TCP/IP)] is not
displayed, select [Install ...].
1.
Click .
• Right-click [My Network] and select [Properties].
2.
Select the network connected to the PC by which VN-C10 is operated.
• Right-click to select [Properties].
VN-C10_E_01-43.pm65e 14/04/03, 10:13 AM 20