JVC V.NETWORKS VN-C10 - Manual (Page 50)

50
4-6 Frame Rate
Sets the maximum number of images per
minute that are sent from VN-C10. This value
is set to “15” at the factory.
Note
The actual number of frames received and displayed per second is affected by factors such as
the PC performance and the image compression rate as well as the LAN environment.
In the case of a LAN environment where multiple operations are being performed at one time
(particularly where the network traffic is always heavy), reduce the number of frames to be
transmitted.
1.
Select [Setting] and [Framerate].
With [V.Networks Controller], it is possible to set the frame rate, the number of
image updates per second, for JPEG.
Frame rate setting with [V.Networks Controller] is possible only for JPEG.
Frame rate for MPEG4 can be set with [V.Networks Setup Tool]. (
☞ Page 38)
2.
Set the frame rate in the [Frame Rate] screen.
Operations (Step 4 Setting with V.Networks Controller)
Caution
Frame rate for local recording cannot be set with [V.Networks Controller]. It is only possible
with [V.Networks Setup Tool]. (
☞
Page 32)
VN-C10_E_44-61.pm65e 14/04/03, 10:18 AM 50