JVC GR-DVM55 - Manual (Page 16)

16
EN
T W
Remote Control Unit
You can use the RM-V712U to control the camcorder. When using the remote control, be sure to point it at
the remote sensor. The transmitted beam effective area for indoor use is approx. 5 m. The transmitted beam
may not be effective or may cause incorrect operation if the remote sensor is directly exposed to sunlight or
powerful lighting.
Installing The Battery
The RM-V712U uses one lithium battery (CR2025).
1 PULL OUT BATTERY HOLDER
Pull out in the direction of the arrow while
pressing the knob as shown.
2 INSERT BATTERY IN HOLDER
Insert the battery in the holder, and be sure to
have the “+” mark visible.
3 RE-INSERT HOLDER
Slide the holder back in until you hear a click.
•Read the warning concerning lithium
batteries (
੬
pg. 2).
Operation Buttons
(
੬
pg. 50, 60)
Up Button (
੬
pg. 50)
Down Button (
੬
pg. 50)
AUDIO MONITOR Button
(
੬
pg. 53)
MBR SET Button (
੬
pg. 62)
START/STOP Button (
੬
pg. 19)
PAUSE IN connector (
੬
pg. 63)
EFFECT ON/OFF Button
(
੬
pg. 51)
EFFECT Button
(
੬
pg. 51)
FADE/WIPE Button
(
੬
pg. 63)
Left/Right Buttons
(
੬
pg. 50)
SLOW Rewind/Forward
Buttons (
੬
pg. 49)
SHIFT Button (
੬
pg. 50)
DISPLAY Button
(
੬
pg. 60)
Zoom Buttons (
੬
pg. 50)
Knob
R.A. EDIT Buttons (
੬
pg. 63 – 65)
GETTING STARTED (Cont.)
A.DUB Button (
੬
pg. 68)