After use – JVC GR-DVM55 User Manual

Page 75

Advertising
background image

EN

75

1

REMOVE POWER SUPPLY

Remove the battery pack or disconnect the AC
Charger Station (

pg. 8 – 10).

2

CLEAN EXTERIOR

Wipe gently with a soft cloth.

•Put cloth in diluted mild soap and wring it

well to wipe off heavy dirt. Then wipe again
with a dry cloth.

3

CLEAN LENS

Blow it with a blower brush, then wipe gently
with lens cleaning paper.

4

PULL OUT VIEWFINDER

Pull out the viewfinder fully.

5

CLEAN VIEWFINDER

Slide the cover in the direction of the arrow

1

.

Insert a lens blower or a soft cloth into the gap
at the bottom of the viewfinder and clean the
interior of the viewfinder with it

2

.

AFTER USE

6

PUSH VIEWFINDER BACK IN

Slide the cover back to its original position and
push the viewfinder back in.

7

OPEN LCD MONITOR

Open the LCD monitor fully.

8

CLEAN LCD MONITOR

With soft cloth, gently wipe the LCD monitor
in a semicircular pattern. Avoid using too
much pressure as this will smear the monitor
screen, making it much more difficult to clean.

9

CLOSE LCD MONITOR

NOTES:

● Avoid using strong cleaning agents such as

benzine or alcohol. This may damage the unit’s
body or cause malfunction.

● When using a cleaner or chemically treated cloth

refer to the cautions of each product.

Cleaning The Camcorder

2

1

Battery cover

LCD monitor

Bottom of
viewfinder

Battery pack

Open switch
(BATTERY)

Gap

Advertising