JVC GR-DVM55 - Manual (Page 51)

EN
51
T W
OFF
P
L
A
Y
A
M
5S
PLAYBACK EFFECT
STROBE
CLASSIC FILM
MONOTONE
SEPIA
4
1
2
3
OFF 4
B/W
1 START PLAYBACK
Press the Play button (4).
2 ACCESS PLAYBACK EFFECT SELECT
MENU
Point the remote control at the camcorder’s
remote sensor and press EFFECT. The
PLAYBACK EFFECT Select Menu appears.
3 SELECT PLAYBACK EFFECT
Move the pointer and highlight bar to the
desired effect by pressing EFFECT. The selected
function is activated and after 2 seconds the
menu disappears.
NOTES:
● To deactivate the selected effect, press EFFECT
ON/OFF on the remote control. Pressing it again
re-activates the selected effect.
● Repeat from step 2 when you want to change the
selected effect.
● When “MONOTONE” or “SEPIA” is activated, the
“MULTI 4” and “MULTI 9” Snapshot modes
(
੬
pg. 29) are not available.
The effects that can be used during playback are
Classic Film, Monotone, Sepia and Strobe. The
effects work the same in playback as they did in
recording. Refer to page 42 for more information.
Playback Effects
These effects allow you to be creative with the playback picture. You can use any one of the 4 effects.
EFFECT
EFFECT ON/OFF
PLAYBACK EFFECT
Select Menu
PLAY
Lock button
Power Dial
Remote sensor
Play button