JVC GR-DVM55 - Manual (Page 8)

8
EN
Charging The Battery Pack
The battery pack has not been charged at the factory. Before using it, be sure to charge it with the AC
Charger Station.
GETTING STARTED
NOTES:
● If you connect the camcorder’s DC cord to the AC
Charger Station during battery charging, power is
supplied to the camcorder and charging stops
(
੬
pg. 10).
● When using the AC Charger Station, be sure to
use the supplied power cord only.
● When charging the Battery Pack for the first time
or after a long storage period, the Charger
Indicator may not light. In this case, remove the
Battery Pack from the AC Charger Station, then try
charging again.
● Since the AC Charger Station processes electricity
internally, it becomes warm during use. Be sure to
use it only in well-ventilated areas.
● If the battery operation time remains extremely
short even after having been fully charged, the
battery is worn out and needs to be replaced.
Please purchase a new one.
1 SUPPLY POWER TO CHARGER
Plug the AC Charger Station’s power cord in to
an AC outlet. The power lamp comes on.
2 ATTACH BATTERY
Attach while making sure the marks are
facing down and aligned with the correspond-
ing marks on the AC Charger Station.
• The Charger Indicator begins blinking to
indicate charging has started.
3 CONFIRM STATUS
When the charger indicator stops blinking but
stays lit, charging is finished.
4 DETACH BATTERY
Slide the battery in the direction of the arrow
and lift off.
• Remember to unplug the AC Charger
Station’s power cord from an AC outlet.
ATTACH
To AC outlet
Power cord
Charger indicator
Power lamp
DETACH
Battery pack
BN-V607U
AC Charger Station
AA-V60EG
DC OUT jack
Power cord
INFORMATION:
The AC Charger Station (provided) enables you
to charge not only one battery pack but also
one battery pack installed in the camcorder
(
੬
pg. 55).
Battery Approximate charging time
BN-V607U 90 min.
BN-V615U
180 min.
(optional)