JVC GR-DVM55 - Manual (Page 22)

22
EN
LCD Monitor/Viewfinder Indications
You can make the LCD monitor/Viewfinder
indications appear/disappear.
1 PRESS IND.ON/OFF BUTTON
When you do not want the indications to
appear, press the IND.ON/OFF button for
longer than approximately 1 second. Certain
indications disappear.
Press again for longer than approx. 1 second to
make the indicaitons reappear.
NOTE:
It is impossible to make the tape running indicator
and warnings etc. disappear from the LCD monitor
or the viewfinder. For the indications that can be
removed,
੬
pg. 79.
Brightness Control
You can adjust the brightness of the display by
rotating the Select Dial.
1 ADJUST BRIGHTNESS
Rotate the Select Dial until the brightness
indicator moves and the display reaches its
appropriate brightness.
• The brightness indication appears on the
display.
90 min
REC
89 min 3 min 2 min
1 min 0 min
Tape Remaining Indicator
The time remaining on the tape is automatically monitored and displayed (
੬
pg. 79). When the tape ends,
“TAPE END” appears. If the indications are turned off, the tape remaining indicator appears when remaining
time reaches 2 minutes.
blinking
blinking blinking
– – – – – – – – – – 6 BRIGHT
RECORDING Basic Recording (Cont.)
Display
IND. ON/OFF
button
Select Dial