JVC GR-DVM55 - Manual (Page 59)

EN
59
5 SUPPLY POWER
Plug the AC Charger Station’s power cord into
an AC outlet.
6 TURN ON POWER
Turn the camcorder’s Power Dial to “PLAY”,
“
A ” or “ M ” while pressing down the lock
button located on the dial and turn on the
other units.
NOTES:
● You cannot use the battery pack installed in the
camcorder as the power supply since a digital
signal is output from the DV connector only
when using the AC Charger Station.
● When using the camcorder for dubbing, be sure
to use it as a player. The camcorder’s DV
connector is only for output.
● Also refer to the instruction manuals of the
connected units.
1 CONFIRM POWER-OFF STATUS
Make sure all the units are turned off.
2 ATTACH CAMCORDER TO AC
CHARGER STATION
Attach the camcorder to the AC Charger
Station referring to step 2 as shown in the
illustration on pg. 55.
3 CONNECT CAMCORDER TO PRINTER
OR VIDEO UNIT EQUIPPED WITH
DV INPUT CONNECTOR
Pull out the connector cover and open it. Make
connections to the device you want to connect
to using the DV cable, as shown in the
illustration.
4 CONNECT PRINTER TO PC
Connect the printer cable to the printer’s
PARALLEL connector and the PC’s PARALLEL
(PRINTER) connector.