JVC GR-DVM55 - Manual (Page 27)

EN
27
MANUAL
PAUSE
– – –
MANUAL
REC
444
OFF
P
LA
Y
A M
5S
Self-Timer
Once the camcorder is set, the camcorder operator can become part of the scene in a more natural way
adding the final touch to a memorable picture.
1 SELECT OPERATION MODE
Turn the Power Dial to “ ” while pressing
down the lock button located on the dial.
2 PULL OUT VIEWFINDER OR OPEN
LCD MONITOR
Pull out the viewfinder fully or open the LCD
monitor to approx. 90 degrees. The Self-Timer
indication appears.
•The camcorder enters the Record-Standby
mode.
•You can tilt the LCD monitor upward to 180
degrees so that it faces forward and view
yourself while self-recording (with the
viewfinder pushed back).
3 ENGAGE SELF-TIMER MODE
Press START/STOP.
After 15 seconds, the beep sounds and
recording begins.
4 STOP SELF-TIMER RECORDING
Press START/STOP.
•The camcorder re-enters Record-Standby
mode.
5 END SELF-TIMER RECORDING
Set the Power Dial to the “ A ”, “ M ” or “OFF”
position.
•When turning to “OFF”, it is not necessary to
press down the lock button.
To Take A Snapshot In The Self-Timer Mode . . .
.... in step 3, press SNAPSHOT instead of
START/STOP. After 15 seconds, a 6-second still
is recorded. After that, the camcorder enters the
Record-Standby mode.
Power Dial
Display
During recording
Lock button
START/STOP button
Self-Timer indication
After 15 sec.
When the START/STOP button
is pressed, the tally lamp
changes as shown below:
Blinks quickly
(Self-Timer shooting
starts soon) Stops blinking
and stays on
(Self-Timer
shooting starts) Begins blinking
(Self-Timer starts)
After approx. 15 sec.
¥ ¥
4
Power lamp