John Deere OMPC20964 - Manual (Page 14)

GS2 Display—StarFire iTC
OUO6050,0002241 –19–25NOV06–1/1
Fore/Aft
PC8278
–UN–22JUN04
Floating Front Axle Vehicles
PC8277
–UN–01MAY06
Fixed Axis Wheels or Tracks Vehicles
A—Pivot Point—Floating Front B—Pivot Point—-Fixed Axis
Axle Vehicles- Wheels or Tracks Vehicles
The fore/aft value is the distance that receiver is
located from pivot point of tractor.
On some AutoTrac-equipped vehicles, fore/aft value
will be automatically detected and entered during
power up.
• Fore/Aft value is shown and input box is disabled –
value has been automatically set and cannot be
changed. The value shown may not be the exact
distance that the receiver is located from pivot point
of tractor, but the best Fore/Aft value for AutoTrac.
• Fore/Aft value is shown and input box is enabled –
value must be entered manually.
To enter Fore/Aft value:
• Select FORE/AFT input box
• Enter value using numeric keypad
Recommended StarFire Fore/Aft values For John Deere
Vehicles
John Deere Vehicle
StarFire Fore/Aft cm (in.)
6000 Series Tractors 180 cm (71 in.)
7000 Series Tractors 210 cm (82.5 in.)
8000 Series Tractors 210 cm (82.5 in.)
8000T Series Tractors 51 cm (20 in.)
9000 Series Tractors -51 cm (-20 in.)
9000T Series Tractors 51 cm (20 in.)
4700 Series Sprayers 280 cm (110 in.)
4900 Series Sprayers 460 cm (181 in.)
Combine 220 cm (87 in.)
Forage Harvester 157 cm (62 in.)
15-6
121907
PN=14