John Deere OMPC20964 - Manual (Page 55)

GS2 Display—RTK
OUO6050,0002255 –19–25NOV06–1/7
Shared Base Station Security—Setup
PC9596
–UN–10NOV06
StarFire iTC - Shared Base Station Security
A—Rover Access List Setup D—Delete Rover F—Network Status H—Secure
B—Rover Access List E—Delete List G—Toggle Button I—Public
C—Access List
Network ID must be set between 4000 - 4096 to setup
and use SBS RTK security. When the network ID has
been set between 4001 - 4096, the SBS RTK Security
softkey will appear. Select this softkey to setup SBS
RTK Security.
The SBS RTK Network operator will enter into the
base station the serial numbers of RTK vehicle
receivers that are allowed to access the RTK
corrections from that base station. RTK vehicle serial
numbers can be added and removed at any time. Only
those rover serial numbers that are on the access list
on the base station receiver will be allowed to access
the RTK corrections from the base station.
The StarFire iTC - Shared Base Station Security
screen displays the RTK vehicle receiver serial number
and location it is stored. Only the serial numbers on
the RAL will be able to receive RTK corrections from
the base station when RTK Network is in SECURE
mode.
Access List button (C) allows operator to input the
serial number of a receiver into the Access List.
20-12
121907
PN=55
Continued on next page