John Deere OMPC20964 - Manual (Page 77)

Original GreenStar Display—StarFire iTC
OUO6050,0002263 –19–14NOV06–1/1
Differential Correction Setup
PC9735
–UN–19NOV06
SETUP - DIFF CORRECTION
A—RTK Setup
B—StarFire Correction Frequency, Default, Below
C—Frequency
D—StarFire Corrections, Off, SF1 SF2
E—WAAS Correction, Off, On
F——
G—Return to GPS Setup
Differential correction is the process by which GPS
accuracy is improved. (See OVERVIEW: SF1/SF2
ACTIVATIONS, SF2 SUBSCRIPTION in this section.)
Screen: SETUP - DIFF CORRECTION
Press: SETUP >> STARFIRE RECEIVER >> DIFF
CORRECTION SETUP
(See RTK section for RTK Setup.)
IMPORTANT: DO NOT change default StarFire
Correction Frequency unless instructed
to do so by your John Deere Dealer or
by John Deere Ag Management
Solutions.
NOTE: Some information will only appear when receiver
has a license.
Press letter button next to STARFIRE CORRECT FREQ
to toggle between DEFAULT and BELOW.
When STARFIRE CORRECT FREQ is set to BELOW—
press letter button next to FREQ (MHz) then input a
frequency.
Press letter button next to STARFIRE CORRECTION to
toggle between OFF, SF1, and SF2. If toggled to OFF,
StarFire will not receive SF1 or SF2 correction signals. If
receiver does not have a valid SF2 license then SF2 will
not appear on screen.
Press letter button next to WAAS CORRECTION to toggle
between OFF and ON. If toggled to OFF, StarFire will not
receive WAAS correction signals.
25-18
121907
PN=77