John Deere OMPC20964 - Manual (Page 78)

Original GreenStar Display—StarFire iTC
OUO6050,0002264 –19–14NOV06–1/1
Serial RS232 Output
7
4
1
0
5
2
9
6
3
.
8
CLR
SETUP
PAGE
RUN
INFO
JOHN DEERE
A
B
C
D
E
F
G
SETUP Serial Port
Serial Port Baud Rate
19200
Serial Port Output Rate
1 5
Serial Port Message
OFF GGA ON
Serial Port Message
OFF GSA ON
Serial Port Message
OFF RMC ON
Serial Port Message
OFF VTG ON
Serial Port Message
OFF ZDA ON
PC9569
–UN–06NOV06
SETUP - SERIAL PORT
A—Serial Port Baud Rate
B—Serial Port Output Rate, 1, 5
C—Serial Port Message, GGA, OFF, ON
D—Serial Port Message, GSA, OFF, ON
E—Serial Port Message, RMC, OFF, ON
F—Serial Port Message, VTG, OFF, ON
G—Serial Port Message, ZDA, OFF, ON
Screen: SETUP - SERIAL PORT
Press: SETUP >> STARFIRE RECEIVER >> SERIAL
RS232 OUTPUT
NOTE: NMEA serial port data is outputted for SF1 only
when connected to a GreenStar system. NMEA
serial port data is always outputted for SF2 and
RTK.
These settings are only for NMEA serial port
messages for communication with
non-GREENSTAR systems.
Serial port baud output rates are: 4800, 9600,
19200 and 38400.
The following items can be setup in SETUP - SERIAL
PORT screen:
• Serial Port Baud Rate
• Serial Port Output Rate
• GGA Port Message
• GSA Port Message
• RMC Port Message
• VTG Port Message
• ZDA Port Message
Press letter button next to desired cell, toggle to desired
selection.
Serial Port Output Rate
NOTE: Serial port settings do not affect GreenStar
applications.
Press letter button next to SERIAL PORT OUTPUT RATE
to toggle/select from 1 to 5 Hz.
Serial Port Messages
Press letter button next to SERIAL PORT MESSAGE to
toggle/select between ON and OFF.
25-19
121907
PN=78