JVC XU-301BK - Manual (Page 17)

15
English
• Press the button correspond-
ing to the CD whose track is
to be heard.
Direct Play (starting play from a spe-
cific track)
CD play can be started from a specific track by pressing the corresponding number button(s) on the
remote control.
1 Press the CD button.
2 Press the number button(s).
• To play a track from No.1 to No.10
Press the number button ( ~ ) corresponding to the track.
• To play track No.11 or above
First press the button, and then press one of the number buttons ( ~ ).
Example: Track No.15
Press
followed by .
Example: Track No.20
Press
followed by .
Example: Track No.25
Press
twice followed by .
•
•
•
The track number corresponding to the buttons pressed appears in the display window, and direct play
now starts.
• Another track can be selected even during play.
Press the number button(s) corresponding to the track which is to be heard. The display now changes
to indicate the corresponding track No., and play starts from the beginning of the track concerned.
•
To select a track of a CD on another tray, select the CD tray and then perform the same operation.
Reverse Search and Forward Search
After pressing the CD button.
• Reverse search or forward search is possible by holding down the corresponding button during play.
A garbled sound will be heard during reverse search or forward search. Release your finger when the
part to be heard is reached.
Main unit Remote control
1 2 1 2
Reverse search Forward search Reverse search Forward search
05/p12-19 (E) 4/1/98, 4:38 PM 15