Cd recording (listening edit recording), 31 english, 1 first, select and stop the cd to be recorded – JVC XU-301BK User Manual
Page 33: 2 insert the recording md, 3 press the listening edit button, 4 program the tracks (while the cd is playing), Selected tracks can be programmed and recorded, Insert the md with its label side facing up
31
English
There is no need to adjust the recording level (for a digital recording).
Upon completion of the MD recording, “UTOC WRITING” is displayed. Operating any button while
this message is displayed may render the MD unusable.
Always wait for “UTOC WRITING” to be cleared before proceeding with the next operation.
This unit uses a microcomputer to perform a large number of operations. If the unit fails to operate
no matter which button is pressed, disconnect the power cord, and then wait a few moments before re-
connecting it.
CD Recording (LISTENING EDIT recording)
1 First, select and stop the CD to be recorded.
Example: When recording CD1
•
Only the selected CD is recorded.
2 Insert the recording MD.
•
Insert the MD with its label side facing up.
3 Press the LISTENING EDIT button.
•
Start play from the first track, “LISTENING EDIT” is scrolled and displayed, and the play time of
the first track and remaining recording time on the MD are displayed. MD is set to the rec pause
mode.
4 Program the tracks (while the CD is playing).
a. When the track now playing is to be recorded
•
The track is stored in the memory, and operation moves on to
the next track.
b. When the track is not to be recorded
•
The track is not stored in the memory, and operation moves on
to the next track.
•
When the first track has been stored in the memory
“1” is cleared from the music calendar.
Play time of second track
Remaining recording time on MD
LISTENING
EDIT
SKIP
LISTENING
EDIT
XU-301 MD-CD COMBINATION DECK
REC
PAUSE
REC
START
REC
DIGITAL
CD
REC SOURCE SELECTOR
LINE
MIC
STOP
MIXING
CANCEL
CD
MD
MIC
MAX
MIN
PHONES
MIX BALANCE
REC LEVEL
CD
LINE
LINE
MIC
PLAY MODE
/CHARA
DISPLAY
TITLE
EDIT
32kHz
44.1kHz
DIGITAL INPUT
48kHz
LISTENING
SKIP
1st TRACK
REC
TIMER
/CLOCK
STANDBY
CD REC
SET
2
CD
CD
3
1
CD
PLAY & EXCHANGE
3
-
CD
NORMAL SPEED
CD PITCH CONTROL
POWER
EDIT
1
2
-1
1
-2
3
4
a
4
b
·
SAMPLING RATE CONVERTER
Selected tracks can be programmed and recorded.
DIGITAL
L
R
40 30
15 10
20
6
3
0
CD
MD
REC
07/p24-33 (E)
4/1/98, 4:44 PM
31