Recording onto mds – JVC XU-301BK User Manual
Page 28
26
English
5 Select and enter the track.
6 Repeat steps 4 and 5 (this procedure can be repeated for up to
16 tracks).
•
The tracks on the MD alone or only the tracks on the CDs can be programmed also.
7 Press the
£ button to start MIX PROGRAM play.
Operation stops automatically when all the programmed tracks have been played. The same operating
procedure is followed for programs 2 and 3.
•
To return the program mode to the normal status in the stop mode
Recording onto MDs
Types of recording —————————————————————
The following 5 types of recording are possible with this unit.
•
Manual recording (page
28)
One of the recording sources is selected, and its material is recorded.
•
DIGITAL
•
CD (CD1–CD3)
•
LINE
•
MIC
•
CD recording (single-action recording) (page
29)
CD recording is initiated by a single action: just press the CD REC button.
•
CD recording (1st TRACK recording) (page
30)
When the 1st TRACK REC button is pressed, only the first tracks on CD1, CD2 and CD3 are
recorded. You can compile your own album of original hit numbers.
•
CD recording (LISTENING EDIT recording) (page
31)
When the LISTENING EDIT button is pressed, only the tracks you want to hear can be programmed
and recorded.
•
Mixing recording (page
32)
This enables mixing recording for CD + LINE, CD + MIC or LINE + MIC.
1 Select the track. 2 Enter the selection.
Read through this section
before recording.
PLAY MODE
•
Repeatedly press this until the play time
appears in the display window.
•
The play time display appears when
this button is pressed.
SET
Remote control
Main unit
07/p24-33 (E)
4/2/98, 1:27 PM
26