JVC XU-301BK - Manual (Page 6)

4
English
DIGITAL IN
OPTICAL
DIGITAL OUT
OPTICAL
LINE
COMPU LINK-3
SYNCHRO
MODE
VICTOR COMPANY OF JAPAN , LIMITED MADE IN JAPAN
MD TD
IN REC ( )
( )
( )
OUT PLAY ( )
L LEFT
RIGHT R ( ) 2 SLAVE UNIT
( ) 1 MASTER UNIT
( ) 2 SLAVE UNIT
( ) 1 MASTER UNIT
TEXT COMPU LINK
TEXT
COMPU LINK
TAPE
/MD
IN
(PLAY)
OUT
(REC)
COMPU LINK-3
SYNCHRO
COMPU LINK-3
SYNCHRO
Misconnections can be avoided by using the white plugs on the
accessory pin cords for the LEFT channel and the red plugs for the
RIGHT channel.
Insert the plugs all the way in. Incomplete connections cause noise.
Connections
Analog Connections
Use the accessory pin cords to connect the unit’s LINE connectors with the MD connectors on the receiver, etc.
Do not turn on the power until all the
connections have been completed.
Recording signals
(line input)
Accessory pin cord
Playback signals
Accessory connecting cord
(with black plugs)
Accessory connecting cord
(with green plugs)
XU-301BK MD-CD combination deck
Power cord
MODE switch
Optional connecting cord
This is connected for synchro recording.
CD player, cassette deck or
other component made by JVC
• Selecting the MODE switch position
• When connected with MD
input/output terminals of the
amplifier or receiver
• When connected with TAPE
input/output terminals of the
amplifier or receiver
Support for JVC’s
TEXT COMPU LINK
• For further details on the TEXT COMPU LINK function, see page 51.
When connection is made
to a CD player only
When connection is made
to a receiver only
When connection is made
to a receiver and CD player
Amplifier, receiver etc.
1 (MASTER UNIT)
2 (SLAVE UNIT)
2 (SLAVE UNIT)
• Setting of 1 (MASTER UNIT) and 2 (SLAVE UNIT) selector
MD
MODE
TD MD
MODE
TD
• For further details on the COMPU LINK function, see page 50.
NOTE
Before selecting the COMPU LINK-3 mode (MD or TD) or TEXT
COMPU LINK (master or slave) function, disconnect the power
cord from the power outlet to turn off the power. The function will
be not be set if it is selected while the power is on.
Alternatively, when the COMPU LINK-3 mode (MD or TD) or
TEXT COMPU LINK (master or slave) function is selected while
the power is on, disconnect the power cord and then re-connect it.
04/p04-11(E) 4/1/98, 4:35 PM 4