49 english, 9 turn off the power, Continued from page 47 (while “play?” is flashing) – JVC XU-301BK User Manual
Page 51
49
English
Timer Recording (unattended record-
ing of the sound from a broadcast re-
ceiver or other component)
Continued from page
47
(while “PLAY?” is flashing)
6 Select “REC?” and press the SET button.
7 Select the sound source to be recorded, and press the SET button.
8 Place the recording MD in position.
•
Place the MD with its label side facing up, and insert it in the direction of the
# or ] mark.
9 Turn off the power.
The present time now appears in the display window.
Match the timer of the connected source with the unit’s setting. (In the case of the mic input, ensure
that the microphone has been connected to the unit.)
•
•
•
Recording will now start at the programmed start time, and the power will be turned off at the
programmed end time.
When operation is completed once in the ONCE TIMER mode, the timer programming is cleared.
If digital signals are not supplied when timer recording has been started with digital input signals,
“ DIGITAL IN UNLOCK” is scrolled on the display, and no signals will be recorded.
When using the timer to record a BS program, for instance, check that the broadcast station with the
desired program can be tuned in correctly before programming the timer start and end times.
The timer programming is cleared when the power has failed or the power cord has been discon-
nected. In a case like this, reset the clock and repeat the timer programming.
ONCE
1 Select “
.”
2 Press the SET button.
\
Lamp lights.
STANDBY
POWER
STANDBY
POWER
The timer programming is displayed once,
and then the function display is restored.
This display appears when the ONCE TIMER
play mode is set.
When the jog dial is
turned clockwise
SOURCE OPT?
: Optical digital input
«
SOURCE LINE?
: Line input (analog)
«
SOURCE MIC?
: Mic input (analog)
\
XU-301 MD-CD COMBINATION DECK
REC
PAUSE
REC
START
REC
DIGITAL
CD
REC SOURCE SELECTOR
LINE
MIC
STOP
MIXING
CANCEL
CD
MD
MIC
MAX
MIN
PHONES
MIX BALANCE
REC LEVEL
CD
LINE
LINE
MIC
PLAY MODE
/CHARA
DISPLAY
TITLE
EDIT
32kHz
44.1kHz
DIGITAL INPUT
48kHz
LISTENING
SKIP
1st TRACK
REC
TIMER
/CLOCK
STANDBY
CD REC
SET
2
CD
CD
3
1
CD
PLAY & EXCHANGE
3
-
CD
NORMAL SPEED
CD PITCH CONTROL
POWER
EDIT
6
7
8
9
·
SAMPLING RATE CONVERTER
SET
SET
09/p45-49 (E)
4/1/98, 5:09 PM
49