Mounting an ex3200 or ex4200 switch – Juniper Networks EX4200 User Manual

Page 142

Advertising

Table 32: Inventory of Components Provided with an EX3200 or EX4200 Switch (continued)

Quantity

Component

RJ-45 cable and RJ-45 to DB-9 serial port adapter

Virtual Chassis cable (for an EX4200 switch)

Virtual Chassis cable connector retainers (for an EX4200 switch)

Dust covers for ports (for an EX4200-24F switch)

Related Topics

■

Mounting an EX3200 or EX4200 Switch on page 116

■

Installing and Connecting an EX3200 or EX4200 Switch on page 113

■

Connecting and Configuring an EX Series Switch (CLI Procedure) on page 161

■

Connecting and Configuring an EX Series Switch (J-Web Procedure) on page 163

Mounting an EX3200 or EX4200 Switch

You can mount an EX3200 or EX4200 switch:

■

On two posts in a 19-in. rack or cabinet by using the mounting brackets provided
with the switch.

■

On four posts in a 19-in. rack or cabinet by using the separately orderable
four-post rack-mount kit.

■

In a position recessed 2 in. from the front of a 19-in. rack or cabinet by using
the 2-in.-recess front brackets in the separately orderable four-post rack-mount
kit. You can mount the switch in this recessed position on two-post or four-post
racks and cabinets.

■

On a desk or other level surface by using rubber feet. The switch is shipped with
four rubber feet to be used to stabilize the chassis on a desk or other level surface.

■

On a wall by using the separately orderable wall-mount kit.

The holes in the mounting brackets are placed at 1 U (1.75 in. or 4.45 cm.) apart so
that the switch can be mounted in any rack or cabinet that provides holes spaced at
that distance.