Juniper Networks EX4200 - Manual (Page 153)

Figure 45: Mounting an EX3200 or EX4200 Switch on a Wall
Hang attached brackets
on wall-mounted screws.
g020201
Front
panel
Rear panel
5. Tighten the mounting screws.
6. If it is an EX4200-24F switch, we recommend you insert dust covers in unused
SFP ports.
Related Topics ■ Connecting AC Power to an EX3200 or EX4200 Switch on page 146
■ Connecting DC Power to an EX3200 or EX4200 Switch on page 148
■ Connecting and Configuring an EX Series Switch (CLI Procedure) on page 161
■ Connecting and Configuring an EX Series Switch (J-Web Procedure) on page 163
■ Wall-Mounting Warning for EX3200 and EX4200 Switches on page 225
Mounting an EX3200 or EX4200 Switch on a Wall ■ 127
Chapter 9: Installing the Switch