Juniper Networks EX4200 - Manual (Page 63)

Figure 26: XFP Uplink Module
g020108
Link/Activity
LED Link/Activity
LED
Status LED Status LED
Port 0 Port 1
XFP uplink modules are shipped with a dust cover preinstalled in one port.
The XFP uplink module requires JUNOS Software for EX Series switches, Release 9.0
or later.
Related Topics ■ Network Port LEDs in EX3200 and EX4200 Switches on page 20
■ Uplink Modules Connector Pinout Information for EX3200 and EX4200 Switches
on page 67
■ Optical Interface Support in EX3200 and EX4200 Switches on page 43
■ Example: Configuring Aggregated Ethernet High-Speed Uplinks Between a Virtual
Chassis Access Switch and a Virtual Chassis Distribution Switch
■ Example: Configuring Aggregated Ethernet High-Speed Uplinks with LACP
Between a Virtual Chassis Access Switch and a Virtual Chassis Distribution Switch
■ Installing an Uplink Module in an EX3200 or EX4200 Switch on page 133
■ Troubleshooting Uplink Module Installation or Replacement on EX3200 and
EX4200 Switches on page 192
Uplink Modules in EX3200 and EX4200 Switches ■ 37
Chapter 2: Component Descriptions