Juniper Networks EX4200 - Manual (Page 36)

■ Connecting Earth Ground to an EX Series Switch on page 141
■ Installing and Removing EX3200 and EX4200 Switch Hardware Components on
page 129
Front Panel of an EX4200 Switch
The front panel of an EX4200 switch consists of the following components:
■ Network ports—depending on the switch model, either of:
■ 10/100/1000Base-T Gigabit Ethernet ports, some or all of which are enabled
for Power over Ethernet (PoE)
■ 100Base-FX/1000Base-X SFP ports for use with fiber-optic connections
■ Uplink module ports—SFP, SFP+, or XFP ports (The uplink module is an optional
feature.)
■ LCD panel and the LCD navigation buttons
■ Chassis status LEDs
■ Network port LEDs
Figure 4 on page 10 shows the front panel of an EX4200 switch with 48 Gigabit
Ethernet ports. Figure 5 on page 10 shows the front panel of an EX4200 switch with
24 Gigabit Ethernet ports. Figure 6 on page 11 shows the front panel of an
EX4200-24F switch with 24 SFP ports for use with fiber-optic connectors.
Figure 4: EX4200 Switch with 48 Gigabit Ethernet Ports
Figure 5: EX4200 Switch with 24 Gigabit Ethernet Ports
10 ■ Front Panel of an EX4200 Switch
Complete Hardware Guide for EX3200 and EX4200 Ethernet Switches