John Deere 5310 S - Manual (Page 141)

Service
PY80265,05I0277 –19–12SEP05–1/1
Replace Flood Lamp Bulb
PY1080
–UN–02JUL01
1. Loosen mounting hardware (A) and rotate flood lamp
up to access cover fastening screw
2. Remove screw, lamp cover and lamp from housing
3. Disconnect wiring leads from bulb
4. Rotate bulb counterclockwise and remove
5. Reverse the procedure to reassemble the flood lamp
PY80265,05I0278 –19–12SEP05–1/1
Checking Tyres
1. Check tyres daily for damage or noticeably low
pressure.
2. Have any cuts or breaks repaired as soon as
possible.
3. Protect tyres from exposure to sunlight, petroleum
products and chemicals.
4. Drive carefully. Try to avoid rocks and sharp
objects.
IMPORTANT: Minimum pressures may be used
only for light loads and only if
tractor has no added weight. If you
install ballast or mounted
implements, or if you pull heavy
loads, increase pressure.
5. If tyre contains liquid ballast, jack up the rear wheel
and measure tyre pressure keeping valve stem at
topmost position.
Refer to Tyre Inflation Pressure Chart in Wheels,
Tyres and Treads section.
140-22
082206
PN=139