John Deere 5310 S - Manual (Page 64)

Remote Hydraulic Cylinders
GENERIC,0000052 –19–20FEB06–1/1
Extending/Retracting Cylinder
PY5789
–UN–08JUN06
M47174
–UN–31JAN92
A—Control Lever
B—Extend and Retract Cylinder
Extending Cylinder
Pull lever (A) to the rear of neutral and hold it against
spring pressure. This extends cylinder (B) (up arrow)
connected to couplers and in most cases raises
implement. Lever returns to neutral when released.
Retracting Cylinder
Push lever (A) forward and hold it against spring pressure.
This retracts cylinder (B) connected to SCV couplers and
in most cases lowers implement. Lever returns to neutral
when released.
Float Position
Push lever full forward into detent to operate Float feature.
Float operation allows cylinder to extend and retract
freely, such as when an implement follows ground
contour.
IMPORTANT: When “Float” is not needed, manually
move lever back to neutral position to
prevent accidental use of “Float”.
60-4
082206
PN=62