John Deere 5310 S - Manual (Page 80)

Wheels, Tyres and Treads
PY80265,05I0178 –19–12SEP05–1/1
Tyre Inflation Pressure Chart
Tyre Inflation Pressure Chart 5310 S
With Maximum Ballast or Heavy
Front Tyres With Little or No Added Weight Mounted Implement
Tyre Size Ply Rating Tread kPa (bar) (psi) kPa (bar) (psi)
6.5-20 8 F2 140 (1.4) (20) 200 (1.9) (29)
With Maximum Ballast or Heavy
Rear Tyres With Little or No Added Weight Mounted Implement
Tyre Size Ply Rating Tread kPa (bar) (psi) kPa (bar) (psi)
18.4-30 14 R1 97 (0.97) (14) 131 (1.31) (19)
PY80265,05I0179 –19–12SEP05–1/1
Tighten Wheel/Axle Hardware Correctly
CAUTION: NEVER operate tractor with a
loose rim, wheel, hub, or axle.
Any time hardware is loosened, tighten to specified
torque.
NOTE: Follow checking procedure when a new tractor
is first used, or wheels have been off.
1. After driving tractor about 100 m (109 yd), and
before placing it under load, tighten hardware to
specified torque.
2. Check hardware after working three hours and
again after 10 hours.
3. Check all hardware frequently and keep it tight.
75-3
082206
PN=78