John Deere 5310 S - Manual (Page 153)

Tractor Storage
GENERIC,0000059 –19–11JUL06–2/2
PY4101
–UN–20AUG04
PY1418
–UN–03FEB03
PY5515
–UN–17FEB06
PY4946
–UN–21APR05
A—Fuel Tank Filler Cap
B—Engine Oil Filler Cap
C—Air Cleaner Inlet Hole
D—Dust Unloader Valve
E—Transmission-Hydraulic Filler Cap
7. Add 0.5 L more inhibitor to fuel tank at filler cap (A).
8. Add 0.5 L inhibitor to engine crankcase at filler (B).
9. Remove air intake hose at manifold. Pour 0.1 L
inhibitor into manifold and replace hose. Pull hand
throttle back to slow idle position. Crank engine only a
few revolutions.
10. Loosen alternator/fan belt after they have cooled.
11. Remove and clean battery. Store in a cool, dry place.
Keep it charged. 1
12. Tie or block clutch pedal in the disengaged position.
13. Coat exposed bare (no paint) metal surfaces with
grease or a corrosion inhibitor.
14. Use tape to seal air inlet hole (C), dust unloader valve
(D), exhaust pipe, crankcase filler (B), fuel caps, and
transmission-hydraulic system filler cap (E).
15. Cover dash with opaque material to prevent gauges
from fading.
16. Raise tyres off ground. Protect them from heat and
sunlight.
17. Thoroughly clean tractor. Touch up any painted
surfaces that are scratched or chipped.
18. If tractor must be stored outside, cover it with a
waterproof material.
1 Disconnect battery ground cable for short-term storage periods (20 to
90 days).
150-2
082206
PN=151