John Deere 5310 S - Manual (Page 36)

Operating the Engine
GENERIC,0000054 –19–11JUL06–1/1
Before Starting the Engine
TS220
–UN–23AUG88
PY5512
–UN–17FEB06
PY5527
–UN–21FEB06
PY4316
–UN–14DEC04
A—Gear Shift Lever
B—Range Shift Lever
C—PTO Lever
D—Rockshaft Draft Control Lever
E—Rockshaft Position Control Lever
CAUTION: Prevent asphyxiation. Engine
exhaust fumes can cause sickness or death to
you or someone else.
If you must operate engine in a building, be
positive there is adequate ventilation. Either use
an exhaust pipe extension to remove the
exhaust fumes or open doors and windows to
bring enough outside air into the area.
1. Check fuel gauge to be sure tractor has plenty of fuel.
2. Place Gear shift lever (A) in neutral (N) or Park and
Range shift lever (B) in Neutral position. Starter will not
operate if gear shift lever is not in these positions.
3. Place rockshaft control levers (D and E) in lower
position.
4. Check indicator lights. Indicators should illuminate
when key switch is turned to the “ON” position.
If any indicator does not function properly, see your
John Deere dealer.
45-1
082206
PN=34