JVC LVT1778-001A - Manual (Page 211)

SETTINGS
55
ENGLISH
Menu items Selectable settings, [reference page]
Input
AV Input* 4 You can determine the use of LINE IN and VIDEO IN terminals. ☞ [45, 46]
Off: Select when no component is connected (“AV-IN” is skipped while
selecting the source).
Audio&Video: Select when connecting an AV component such as a
VCR.
Audio: Select when connecting an audio component such as a portable
audio player.
Camera* 5 : Select when connecting a rear view camera.
Navigation : Select when connecting a Navigation System.
External Input* 6 For connecting an external component to the CD changer jack on the
rear.
Changer/iPod*
7 : CD changer or iPod. ☞ [37, 43]
External: Any other than the above. ☞ [47]
• For connecting the Bluetooth adapter and DAB tuner, this setting is
not required. They are automatically detected.
Others
Beep Off: Cancels.
On: Activates the key-touch tone.
Telephone Muting* 8 Off: Cancels.
Muting1, Muting2: Select either one which mutes the sounds while
using the car phone system.
Power LED Flash Off: Cancels.
On: When the ignition is turned off, the lamp on the
button
flashes.
TouchPanel Sens. Change the sensitivity of the touch panel. As the number decreases,
sensitivity becomes higher. 1/2/3
Initialize Initialize all settings you have made in <AV Menu>. Press and hold
[Enter] to initialize the settings, then reset the unit. ☞ [3]
* 4 Not selectable when “AV-IN” is selected as the source.
* 5 The REVERSE GEAR SIGNAL lead connection is required. See Installation/Connection Manual. The rear view through
the camera appears on the screen in <Full> aspect ratio (regardless of the aspect ratio setting) when you shift the
gear to the reverse (R) position. When you press DISP on the control panel, or when you shift the gear to another
position other than the reverse (R) position, the rear view screen is cleared.
* 6 Not selectable when the component connected to the CD changer jack is selected as the source.
* 7 The name of the component detected through the CD changer jack is shown.
* 8 The TEL MUTING lead connection is required. See Installation/Connection Manual.
The procedure for setting an item is shown on page 50.
EN_KW-AVX710[EE].indb 55 EN_KW-AVX710[EE].indb 55 07.12.6 2:19:34 PM 07.12.6 2:19:34 PM