Listening to the satellite radio, English for sirius radio, For xm radio – JVC LVT1778-001A User Manual

Page 36

Advertising
background image

36

ENGLISH

For SIRIUS Radio

Activate your subscription after connection:

1 Turn on the power.

2 Select “SAT” for the source.

☞ also page 9.

The SIRIUS Satellite radio starts updating all the
SIRIUS channels. (

☞ “GCI update” column below.)

• Once completed, SIRIUS Satellite radio tunes in

to the preset channel, CH184.

3 Check your SIRIUS ID, see page 51.

4 Contact SIRIUS on the internet at <http://

activate.siriusradio.com/> to activate your
subscription, or you can call SIRIUS toll-free
at 1-888-539-SIRIUS (7474).
“Subscription Updated Press Any Key to Continue”
appears on the monitor once subscription has been
completed.

For XM Radio

Activate your subscription after connection:

• Only Channel 0, 1, and 247 are available before

activation.

1 Turn on the power.

2 Select “SAT” for the source.

☞ also page 9.

The XMDirect

TM

Universal Tuner Box starts

updating all the XM channels. “Channel 1” is tuned
in automatically. (

☞ “GCI update” column below.)

3 Check your XM Satellite radio ID labelled on

the casing of the XMDirect

TM

Universal Tuner

Box, or tune in to “Channel 0” (see page 37).

4 Contact XM Satellite radio on the internet

at <http://xmradio.com/activation/> to
activate your subscription, or you can call 1-
800-XM-RADIO (1-800-967-2346).
Once completed, the unit tunes in to one of the
available channels (Channel 4 or higher).

Listening to the satellite radio

Before operating, connect either one of the following (separately purchased) to the CD changer jack on the rear of
this unit.
JVC SIRIUS Satellite radio interface, KS-SRA 100, for listening to SIRIUS Satellite radio.
JVC Smart Digital Adaptor, XMDJVC 100, for listening to XM Satellite radio.

GCI (Global Control Information) update:

• If channels are updated after subscription, updating starts automatically, and no sound can be heard.
For SIRIUS: “Channel is Updating XX% completed” appears.
For XM : “UPDATING” appears.
• Updating takes a few minutes to complete.
• Do not press any buttons or perform any operations until updating is completed.

EN_KW-AVX710[J].indb 36

EN_KW-AVX710[J].indb 36

07.12.5 11:59:17 AM

07.12.5 11:59:17 AM

Advertising
This manual is related to the following products: