Jameco Electronics Rabbit 3000 - Manual (Page 167)

158 Rabbit 3000 Microprocessor
The MSB x registers for Timer B (TBM1R/TBM2R) are laid out as shown in Table 11-9.
The LSB x registers for Timer B (TBL1R/TBL2R) are laid out as shown in Table 11-10.
Table 11-9. Timer B Count MSB x Registers
Timer B Count MSB x Register (TBM1R) (Address = 0xB2)
(TBM2R) (Address = 0xB4)
Bit(s) Value Description
7:6 Write
The two MSBs of the comparae value for the Timer B comparator are stored.
This compare value will be loaded into the actual comparator when the current
compare detects a match.
5:0 These bits are always read as zeroes.
Table 11-10. Timer B Count LSB x Registers
Timer B Count LSB x Register (TBL1R) (Address = 0xB3)
(TBL2R) (Address = 0xB5)
Bit(s) Value Description
7:0 Write
The eight LSBs of the comparae value for the Timer B comparator are stored.
This compare value will be loaded into the actual comparator when the current
compare detects a match.
Table 11-11. Timer B Count MSB Register
Timer B Count MSB Register (TBCMR) (Address = 0xBE)
Bit(s) Value Description
7:6 Read The current value of the two MSBs of the Timer B counter are reported.
5:0 These bits are always read as zeroes.
Table 11-12. Timer B Count LSB Register
Timer B Count LSB Register (TBCLR) (Address = 0xBF)
Bit(s) Value Description
7:0 Read The current value of the eight LSBs of the Timer B counter are reported.