Sony Ericsson TT4031 (SE-GM29) - Manual (Page 114)

Owner’s Manual Rev 1.0 Page 114 of 114
Data - GPRS
6.1 AT+CGACT PDP Context Activate or Deactivate
Description Command Possible Responses
Activate or deactivate
the specified PDP
context(s)
+CGACT=[<state>
[,<cid>[,<cid>[,…]]]]
•_ +CME ERROR: <err>
•_ OK
•_ ERROR
Read the command +CGACT? •_ +CGACT: <cid>,
<state>[<CR><LF>
+CGACT: <cid>,
<state>[...]]
•_ OK
•_ ERROR
Test if the command is
supported
+CGACT=?
•_ +CGACT: (list of
supported <state>s)
•_ OK
•_ ERROR
Used to activate or deactivate the specified PDP context(s).
After the command has completed, the MS remains in V.250 command state.
If the MS is already in the requested state, the command is ignored and OK is
returned. If the requested state cannot be achieved, ERROR or +CME: ERROR
is returned. If the MS is not attached to the GPRS service when the activation
form of the command is executed, the MS first performs a GPRS attach and
then attempts to activate the specific contexts.
If no <cid>s are specified the activation form of the command activates all
defined contexts.
If no <cid>s are specified the deactivation form of the command deactivates
all active contexts.
<state> Description
0 PDP context activation deactivated
1 PDP context activation activated
<cid> Description