Sony Ericsson TT4031 (SE-GM29) - Manual (Page 133)

Owner’s Manual Rev 1.0 Page 133 of 133
7.5 AT+CHSU HSCSD Automatic User Initiated Upgrading
Description Command Possible Responses
Set HSCSD automatic
user initiated upgrading
on or off
AT+CHSU=[<mode>] •_ OK
•_ ERROR
Show current setting AT+CHSU? •_ +CHSU=<mode>
•_ OK
•_ ERROR
Test if command is
supported and show
parameter range
AT+CHSU=?
•_ +CHSU: (list of
supported
<modes>s)
•_ OK
•_ ERROR
Enables or disables the HSCSD automatic user-initiated upgrade.
<mode> Description
0 Disable use of UP bit for upgrading. Default value
1 Enable use of UP bit for upgrading