Sony Ericsson TT4031 (SE-GM29) User Manual
Page 250
Owner’s Manual
Rev 1.0
Page 250 of 250
Execute command
AT+CAOC[=<mode>] •_ [+CAOC: <ccm>]
+CME ERROR: <err>
•_ OK
•_ ERROR
Read command, shows
the current mode
AT+CAOC?
•_ +CAOC: <mode>
•_ OK
•_ ERROR
Test command, shows if
the command is
supported
AT+CAOC=?
•_ [+CAOC: (list of
supported <mode>s]
•_ OK
•_ ERROR
Use of Advice of Charge supplementary service command enables the
subscriber to get information about the cost of calls. With <mode>=0, the
execute command returns the current call meter value from the ME. The
command also includes the possibility to enable an unsolicited event
reporting of the CCM information. The unsolicited result code +CCCM: <ccm>
is sent when the CCM value changes, but no more than every 10 seconds.
Deactivation of the unsolicited event reporting is made with the same
command.
Read command indicates whether the unsolicited reporting is activated or
not. Read command is available when the unsolicited result code is
supported.
It is recommended (although optional) that the test command return the
supported mode values.
<mode> Description
0
Query CCM value
1
Deactivate the unsolicited reporting of CCM value
2
Activate the unsolicited reporting of CCM value
<ccm> Description
String type
Three bytes of the current call meter value in
hexadecimal format (e.g. “00001E” indicates decimal
value 30); value is in home units and bytes are similarly
coded as ACMmax value in the SIM