6 at+cgpaddr show pdp address – Sony Ericsson TT4031 (SE-GM29) User Manual
Page 119
Owner’s Manual
Rev 1.0
Page 119 of 119
Enables or disables the sending of unsolicited result codes, +CGEV: XXX from
MS to TE in the case of certain events occurring in the GPRS/packet domain
MS or the network.
<mode> Description
0
Buffer unsolicited result codes in the MS. No codes are
forwarded to the TE
1
Discard unsolicited result codes when MS-TE link is
reserved; otherwise forward them directly to the TE
<bfr> Description
0
MS buffer of unsolicited result codes defined within this
command is cleared when <mode> 1 or 2 is entered
6.6 AT+CGPADDR Show PDP Address
Description Command Possible
Responses
Show PDP addresses for
specified CIDs
+CGPADDR=[<cid>
[,<cid> [,…]]]
•_ +CGPADDR:
<cid>,<PDP_addr>
[<CR><LF>+CGPAD
DR:
<cid>,<PDP_addr>
[...]]
•_ OK
•_ ERROR
Test if the command is
supported
+CGPADDR=?
•_ +CGPADDR: (list of
defined <cid>s)
•_ OK
•_ ERROR
Returns a list of PDP addresses for the specified context identifiers. The test
command returns a list of defined <cid>s.
<cid> Description