Sim application toolkit, 1 at+cpin pin control, 2 at*e2stks sim application toolkit settings – Sony Ericsson TT4031 (SE-GM29) User Manual
Page 227
Owner’s Manual
Rev 1.0
Page 227 of 227
SIM Application Toolkit
15.1 AT+CPIN PIN Control
See 3.23, AT+CPIN PIN Control
15.2 AT*E2STKS
SIM Application Toolkit Settings
Description Command
Possible
responses
Set the presentation of the
unsolicited result codes
corresponding to STK
AT*E2STKS=<on_off
>
•_ +CME ERROR <err>
•_ OK
•_ ERROR
Read the current status of
the presentation of the
unsolicited result codes
AT*E2STKS?
•_ *E2STKS: <on_off>
•_ +CME ERROR <err>
•_ OK
•_ ERROR
Test if the command is
supported
AT*E2STKS=?
•_ *E2STKD: list of
supported <on_off>
•_ +CME ERROR <err>
•_ OK
•_ ERROR
Allows the external application to disable or enable the presentation of the
unsolicited result codes corresponding to the STK commands. Parameter
<on_off> is used to disable or enable the presentation of an unsolicited result
code *E2STK. Setting chosen is stored internally so that it is not necessary to
change it each time the ME is switched on.
If the presentation of the unsolicited result codes is disabled, the messages
below are not sent to the application.
The unsolicited result codes shall be disabled by default.
<on_off> Description
0
Disable the presentation of the unsolicited result codes
related to STK. Default value
1
Enable the presentation of the unsolicited result codes
related to STK
Unsolicited Result Codes: