Sony Ericsson TT4031 (SE-GM29) - Manual (Page 85)

Owner’s Manual Rev 1.0 Page 85 of 85
Enables or disables the sending of unsolicited result codes from ME to TE in
the case of key pressings, display changes, and indicator state changes.
<mode> controls the processing of unsolicited result codes specified within
this command. <bfr> controls the effect on buffered codes when <mode> 1,
2 or 3 is entered. If the ME does not support setting, +CME ERROR: <err> is
returned.
<mode> Description
0 Buffer unsolicited result codes in the TA; if TA result code
buffer is full, codes can be buffered in some other place
or the oldest ones can be discarded
3 Forward unsolicited result codes directly to the TE; TA-TE
link specific inband technique used to embed result codes
and data when TA is in on-line data mode
<ind> Description
0 No indicator event reporting
1 Indicator event reporting using result code +CIEV:
<ind>,<value>. <ind> indicates the indicator order
number (as specified for +CIND) and <value> is the new
value of indicator. Only those indicator events, which are
not caused by +CIND shall be indicated by the TA to the
TE
<bfr> Description
0 TA buffer of unsolicited result codes defined within this
command is cleared when <mode> 1...3 is entered
3.22 AT+CPAS Phone Activity Status
Description Command Possible Responses
Execute Phone Activity
Status
AT+CPAS[=<mode>] •_ +CPAS: <pas>
•_ +CME ERROR <err>
•_ OK
•_ ERROR